Jump to content
Jeremy

DIY LED Corner Lamp For Under $50 / No Tools

Recommended Posts

This cheap, DIY minimalist LED corner lamp/LED fixture is an incredibly easy build as it requires no tools at all. The LED strip lights are sticky on one side, I'm just peeling the back off and sticking it to the PVC. All the PVC and spray paint was purchased at The Home Depot. We bought a 10ft, 1in diameter PVC pipe for $3.24 and had them cut it down to a 5ft piece and two 20in pieces (make sure the store carries the 3 way elbow and caps that fit the size pipe you want before you have them cut it). It could be taller and it could have longer legs, these were the measurements we wanted and liked. To close off the ends of the pipes we purchased 3 end caps for $0.83 a piece and one three way connector/elbow for $2.57 . A can of black spray paint for $6 and LED strip lights for about $27. Just connect all the PVC pieces, paint it and stick the LED lights on it and you're done. The most time consuming part of this project is waiting for the paint to dry. Now we have a fancy LED corner lamp that we paid less than $50 for and we love it!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...