$114.67 - 163.41 Led Smart dimmable Track Light magnetic system track light floodlight and spotlight smart light control

Freely transform and master at wish

Free movement, the angle of the lamp head can be adjusted at will Track corner 90° 360° horizontal adjustment 90° vertical adjustment Track vertical corner 90° Track splicing head

Installated by magnetic, conveniently and concisely

Absorbed by putting it into the track, take them out by pressing the buttons on both sides

Deep Tibetan design conductive strip, safe and worry-free

Zero rick to touch it

The length can be cut at will/ Easy to stitch

Length can be cut at will as requirements without affecting the usage

Three installation methods are available

Recessed mounted
Recessed

Ceiling mounted
Surface

Pendant installation
Suspending

Recessed Track Installation Steps：

The board is at least 60MM away from the ceiling

1. Determine the hole location of the board.
2. Measure the screw hole distance of the embedded parts corresponding to the track, and fix the embedded parts on the wooden board with M4 self-tapping screws.
3. Use self-tapping screws to directly pass through the holes of the five-pound embedded parts , fix the embedded parts with the ceiling board.
4. Install gypsum board using self-tapping screws.
5. Use screws to fix the angle protection line.
6. After the installation of the gypsum board angle protection line is completed, ceiling batch gray paint brush to the gap between embedded parts and ceiling.
7. Disconnect the power and connect the magnetic rail with the embedded parts and lock it into the ceiling trough 8.After the track and ceiling are fixed，track must do power-on test